Compound Transfer

According to the product's requirements for oil temperature, the oil temperature is adjusted differently; the tension of the composite material is correctly given, and the unwinding surface is not wrinkled;

The transfer film must correspond to the rubber edge of the cloth, and it must not be glued to the large roller shaft to affect the peeling;

When producing composite film, both sides of CPE and PET should be basically equal, and CPE should never be exposed;

When producing hot stickers, the unwinding tension should not be too large, so that the hot melt adhesive film surface is flat and not wrinkled;

When you are loading the upper and lower coils, be careful. The air shaft should be filled with air, and the straps should be balanced on both sides. Do not operate alone.